Use chemical-resistant gloves. Standard latex or thin nitrile gloves will dissolve upon contact. Look for heavy-duty butyl or Viton gloves.
If the product gets on the skin, wash immediately with soap and water. First Aid Measures If exposure occurs, follow these steps immediately:
Chemical paint strippers and stripped paint residue cannot simply be thrown into the regular trash or poured down the drain.
: For aerosol versions, do not pierce or burn the container, even after use, as it is under pressure. Safe Handling & Storage abro paint remover msds
ABRO Paint Remover is a powerful chemical tool that can accomplish tasks that sanding or other methods cannot. However, its power is directly tied to its potential for harm. The information within the paints a clear picture of a hazardous substance that demands the highest level of respect and precaution.
While formulations can vary slightly by region and specific product line (such as aerosol vs. liquid liquid cans), industrial paint removers typically rely on a blend of powerful organic solvents:
: Though increasingly regulated, many heavy-duty strippers historically used this chemical. It is a known health risk that converts to carbon monoxide in the bloodstream. Propellants Use chemical-resistant gloves
: Wood, steel, masonry, concrete, brick, and glass.
Always read the specific canister instructions before opening. Ventilate: Set up cross-ventilation or work outside.
Many traditional formulas contain ingredients suspected of being carcinogens (e.g., methylene chloride). Flammability: If the product gets on the skin, wash
The product is classified as hazardous and requires careful handling to avoid severe physical reactions.
Allow the stripper to sit for 5 to 15 minutes. You will see the paint wrinkle, bubble, or blister.
The product is pressurized and contains flammable solvents. It must be kept away from heat, sparks, open flames, and hot surfaces. Vapors can accumulate and potentially cause a flash fire or explosion. 2. Respiratory Irritation and Toxicity
Keep temperatures below 50°C (122°F), especially for aerosol cans, to prevent over-pressurization. Keep out of reach of children and animals. 6. Regulatory and Disposal Information