Tighten the screws firmly, but do not over-tighten, as this could damage the internal components of the TV. Step 2: Locate Studs and Mark the Wall
for 32" to 100" televisions requires precise measurements, proper tool selection, and careful execution to ensure a secure installation. This comprehensive guide walks you through the step-by-step process of mounting your television safely into wood studs or concrete, configuring the VESA pattern, and managing your cables for a clean finish. Pre-Installation Checklist & Required Tools
with appropriate drill bits (3/16" for wood studs, 3/8" for concrete anchors) Socket wrench set (for driving the heavy-duty lag bolts) Phillips head screwdriver Measuring tape and a pencil Safety Verification
Use the wall plate as a template to mark the exact locations for the pilot holes, ensuring the plate is perfectly level. Step 3: Secure the Wall Plate equatech universal tv wall mount 32 to 100 instructions
: With a 3.8mm bit for wood or 8mm masonry bit for brick/concrete.
: Identify the correct VESA screws for your TV's back panel. Attach the vertical mounting arms (brackets) to the TV, using spacers if your TV has a curved or recessed back.
The Equatech Universal TV Wall Mount 32 to 100 is a sturdy and adjustable mount designed for large TVs. By following these instructions, you can ensure a safe and successful installation. If you encounter any issues or have questions, don't hesitate to reach out to the manufacturer's support team. Tighten the screws firmly, but do not over-tighten,
To ensure I provide the most helpful next steps for your project, please let me know: What is your TV?
(Vertical rails for the back of the TV)
Hold the wall plate at your desired viewing height and use the spirit level to ensure it is perfectly straight. Attach the vertical mounting arms (brackets) to the
With the TV brackets now firmly attached to the TV (tighten screws securely): Lift the TV with two people and hook the top edge of the TV brackets onto the wall plate’s top rail. Slowly lower the TV – it should click or settle into place.
Use your stud finder to locate two adjacent wood studs in the area where you want to hang your television. Mark the exact center of each stud using a pencil.