Ericsson Mini Link Cli Commands -

The Ericsson MINI-LINK family of microwave transmission products is the backbone of mobile backhaul and transport networks worldwide. Whether you are working with a MINI-LINK TN, CN, or HC series node, the Command Line Interface (CLI) is the most powerful and direct tool for deployment, integration, troubleshooting, and maintenance. This guide provides a deep dive into the most critical CLI commands for network engineers and field technicians, breaking down everything from initial access to advanced configuration.

When isolating a fault between the radio link, the local hardware, or the lease line, loopbacks are essential diagnostic tools. set radio-link loopback local-near Use code with caution.

show log

| Command | Mode | Description | |---------|------|-------------| | alarm threshold rsl | Global | Set RX level alarm limits | | bandwidth | Radio if | Channel width in MHz | | clock source | Controller | SDH timing source | | copy | Privileged | File operations | | debug | Privileged | Real-time debugging | | enable | User | Enter privileged mode | | frequency | Radio if | TX/RX center frequency | | interface | Global | Enter interface config | | modulation | Radio if | Adaptive or fixed | | ping | Privileged | ICMP echo test | | show system | Any | System status | | snmp-server | Global | SNMP configuration | | speed | Ethernet if | 10/100/1000 setting | | test radio bert | Privileged | Bit error test | | vlan | Global | VLAN creation | ericsson mini link cli commands

test radio loopback remote 1

Modern MINI-LINK nodes primarily transport native Ethernet/IP traffic. Use these commands to manage Layer 2 switching features. show ethernet port status Use code with caution.

copy running-config backup-config — Creates a local recovery point on the node. When isolating a fault between the radio link,

show system log

After login, you land in ( > prompt).

The is an essential tool for telecommunications engineers, offering a powerful alternative to graphical user interfaces for configuring, managing, and troubleshooting microwave transmission nodes. Access and Modes Use these commands to manage Layer 2 switching features

| Shortcut | Function | |----------|----------| | ? | Context-sensitive help | | Tab | Auto-complete command | | Ctrl+A | Move cursor to start of line | | Ctrl+E | Move to end | | Ctrl+K | Delete from cursor to end | | up/down arrows | Recall history | | do | Execute show command from config mode (e.g., do show version ) | | no | Negate a command (e.g., no interface vlan1 shutdown ) |

show interface brief (Shows all ports and their operational status).