Fanuc 9000 Parameters List -

To view or edit the O9000–O9999 subroutines controlled by these parameters: Press the key. Type 3202 and press the No. SRH (Number Search) softkey.

Complete Guide to FANUC 9000 Series Parameters: Custom Macros and System Controls

Activating AIAPC (Advanced Intelligent Application Control) or similar, which often requires specific 9000-series settings to function correctly.

allow you to assign a custom G-code to call a specific 9000-series program, while 6080–6089 do the same for M-codes. CNC Training Centre Critical Warning fanuc 9000 parameters list

PWE is the master safety lock on all parameters. By default, it is set to 0 (write protected). To enable changes:

FANUC reading convention for bits is right-to-left, starting at 0.

In the world of CNC machining, Fanuc controls are the industry standard for reliability and performance. However, what sets a base-model Fanuc control apart from a fully loaded one often isn’t the hardware, but the software options activated within the system. To view or edit the O9000–O9999 subroutines controlled

| Call Parameter No. | Associated Program No. | Notes | |:---|:---|:---| | 6080 | O9020 | Sets the M-code for Program O9020 (often for tool change). | | 6081 | O9021 | Sets the M-code for Program O9021. | | ... | ... | A standard macro call links M-codes to programs. | | 6089 | O9029 | Sets the M-code for Program O9029. | | 6071 | O9001 | Sets the M-code for Program O9001. | | ... | ... | Often used for specific sub-programs in a tool change sequence. | | 6079 | O9009 | Sets the M-code for Program O9009. |

In FANUC CNC controls (such as 0i-MC/MD/TF, 16i, 18i, 21i, and 31i), parameters numbered in the 9000 range are reserved for high-level system configurations, software options, and custom macro call behaviors.

The following is a list of commonly referenced option parameters for Series 10/11/12/15/18 systems: Parameter No. Description Complete Guide to FANUC 9000 Series Parameters: Custom

| Item | Backup Method | Notes | |:---|:---|:---| | All CNC Parameters (including 9000 series) | Output via RS-232 using the function. | This is the most common method for an all-in-one backup. | | Pitch Error Compensation Data | Output via RS-232. | This data is specific to each machine tool and can be time-consuming to recreate. | | 9000 Series Programs | Output via RS-232. | Ensure Parameter 2201.0 is set to 0 to enable punching of these protected programs. | | Macros, Offsets, Variables | Output via RS-232. | These values are crucial for custom machining cycles. | | PMC Parameters (Timers, Counters, Keep Relays) | Manually write down all values on paper. | The standard PUNCH function on many older controls does not output these. |

Turn the mode selector switch to .

Rigid tapping, workpiece counters, clock displays, and tool life management. Memory Management: