Foxconn N15235 Motherboard Front Panel Connectors [best] Jun 2026

The audio jacks on the Foxconn N15235 motherboard provide users with a convenient way to connect their audio devices. The microphone connector is usually labeled as "Mic" or "MIC_IN", while the headphone connector is labeled as "HP" or "HEADPHONE". The line-in connector is used to connect external audio devices, such as a CD player or a sound card.

| Header Pin | Signal Name | Typical Connector Label(s) | Polarity | | :--------- | :----------------- | :------------------------------------------------------------------------------------------ | :------- | | | HDD_LED+ (Positive) | HDD LED, HD LED, IDE_LED | Polarized | | PIN 3 | HDD_LED- (Negative) | (Often the same cable) | Polarized | | PIN 5 | RESET_SW | RESET, Reset SW, RST | Non-Polarized | | PIN 7 | RESET_SW_GND | (Often the same cable) | Non-Polarized | | PIN 2 | PWR_LED+ (Positive) | POWER LED, PLED, PWRLED | Polarized | | PIN 4 | PWR_LED- (Negative) | (Often the same cable) | Polarized | | PIN 6 | PWR_SW | POWER SW, PWR, PWRBTN#, ON/OFF | Non-Polarized | | PIN 8 | PWR_SW_GND | (Often the same cable) | Non-Polarized | | PIN 9 | NC / SPKR | NC = Not Connected, or used for speaker header (PIN 9 = +5V, PIN 7 = SPKR) for beep codes. | - | | PIN 10 | KEY / No Pin | Blank / Missing pin used for alignment. | - |

Foxconn N15235 motherboard features a system front panel header (labeled as or JFP1 ) typically located on the lower right edge of the board . This header connects the computer case's buttons and LEDs to the motherboard, allowing the system to power on and display activity. Front Panel Header Pinout (FP1/JFP1) foxconn n15235 motherboard front panel connectors

Before plugging anything in, you need to understand an important detail about Foxconn motherboards:

Connects to the physical reboot button on your PC case (if your case has one). Step-by-Step Cable Installation Guide The audio jacks on the Foxconn N15235 motherboard

Aside from the F_PANEL, the N15235 also has front USB and Audio headers.

Connect the "Power LED" to the top middle pins. 5. Other Front Panel Connectors (USB/Audio) | Header Pin | Signal Name | Typical

Foxconn N15235 Motherboard Front Panel Connectors: The Ultimate Wiring Guide

) stamped into the plastic connector; the arrow indicates the wire. Step 2: Connect the Power Switch (PWR_SW) Take the connector labeled PWR SW or POWER SW .