Mt6735m Dead Hang Logo Done Repack =link= | Huawei Lual02 Firmware Flash File

Fixes devices that fail to power on or only show a red light after a failed flash attempt. Hang on Logo Fix:

With the flashing mode set to , click the green Download arrow button at the top of the SP Flash Tool interface. The software is now waiting for the device connection.

| Error Code | Meaning | Repack-Specific Fix | |------------|---------|----------------------| | S_BROM_CMD_SEND_DA_FAIL (0x7D4) | Preloader mismatch | Use repack’s custom DA + check USB cable | | S_DL_GET_DRAM_SETTING_FAIL (0x13BE) | DRAM initialization error | Power cycle battery, use Format All + Download | | S_DL_PMT_ERR_NO_SPACE (0x1312) | Partition table too large | Repack scatter adjusted – raise partition size | | STATUS_EXT_RAM_EXCEPTION (0xC0060003) | Corrupted preloader | Flash only preloader first, then full ROM | | BROM ERROR: S_FT_ENABLE_DRAM_FAIL (0xFC0) | CPU not entering download mode | Reinstall drivers, try another USB port |

Open the folder and verify that files like preloader.bin , recovery.img , boot.img , system.img , and the critical text file MT6735M_Android_scatter.txt are present. Step 3: Configure SP Flash Tool Fixes devices that fail to power on or

Huawei LUAL02 Firmware Flash File MT6735M: Fix Dead/Hang Logo (Repack Done)

: The phone stays permanently on the Huawei logo and never boots into the home screen.

Restart your Windows PC into mode. Run the MediaTek VCOM Driver setup wizard. | Error Code | Meaning | Repack-Specific Fix

The steps to restore your signal/IMEI if they were lost.

Ensure all partitions are checked (Preloader, Boot, Recovery, System, etc.). 3. Flash the Device Click the button in the SP Flash Tool. Turn off your Huawei LUAL02 completely.

Right-click on the installer file and select . Run the MediaTek VCOM Driver setup wizard

Download and extract the Huawei LUA-L02 firmware to a folder on your desktop. Inside, you should find several files, including the critical MT6735M_Android_scatter.txt . Launch Flash_tool.exe as an administrator.

By following this guide carefully, your device should be completely restored from a dead state or hang logo loops back into perfect working condition! If you want to troubleshoot further, tell me: What error code (if any) SP Flash Tool is throwing?

: Indicates the PC has successfully detected the hardware connection.