Re-map the programmable side keys to instantly access functions like scan, talkaround, high/low power, or emergency alerts. Hardware Requirements for Programming
To program the series, you need specific cloning software and a hardware interface. It is important to distinguish between the analogue (IC-F2000) Go to product viewer dialog for this item. and digital (IC-F2000D) versions, as they require different software packages . Required Software
Click on again and select Read (← Radio) , or click the "Read" icon on the toolbar. icom icf2000 programming software full
If you are using the official cable, download and install the latest USB driver from the official ICOM website. If you are using a third-party FTDI cable, Windows Update usually installs the correct driver automatically.
Navigate to the folder in the left-hand tree menu. Here you can edit the channel table: Re-map the programmable side keys to instantly access
Before attempting to program your radio, ensure you have the correct hardware setup. Using unauthorized or incorrect cables can result in communication errors or corrupted radio firmware.
: Compatible with Windows XP, Vista, 7, and 8 (32/64 bit). Key Programming Features and digital (IC-F2000D) versions, as they require different
Input your RX/TX frequencies, CTCSS/DTCS tones, power levels, and channel names.
If writing fails halfway through, it is often due to an unstable USB extension cable or a bad third-party cable driver. Always plug the programming cable directly into the PC's motherboard ports (on the back of a desktop) rather than a USB hub.