For modern PC users (Windows 10/11), you must use the Professional Series CPS . Do not attempt to use DOS RSS unless you have a vintage laptop with a physical COM port.
A stable 13.8V DC power supply to power the GM360 mobile radio during the read/write process. Do not interrupt the power during programming. Step-by-Step Guide to Programming the GM360
Before opening the software, you must correctly connect your GM360 to your PC. motorola gm360 programming software
Assuming you have obtained a legitimate copy of Commercial Series CPS R05.16, follow these steps:
Software is useless without the right cable. The GM360 uses a specific 15-pin D-sub accessory connector on the rear of the radio. For modern PC users (Windows 10/11), you must
Displays the model number, serial number, and current firmware version.
Two-Way Radio Tech is a team of licensed amateur radio operators and commercial radio technicians with over 20 years of experience in Motorola, Kenwood, and Icom programming. Do not interrupt the power during programming
Before making any changes, you must pull the existing configuration (known as a Codeplug) from the radio. Turn on the GM360 radio.
While the world has largely shifted toward digital standards like MOTOTRBO (DMR)