Yes, it can. Attempting a re-partition and failing can leave your phone without a valid partition table, making it unbootable (a "soft brick"). This is usually recoverable by successfully completing a re-partition, but data loss is almost certain.
When “Re-Partition” is in Odin, the tool uses a .pit file to rewrite the device’s internal partition table (e.g., sizes/locations of /system , /cache , /userdata ). Odin automatically enables re-partition when flashing a 4-file firmware (BL, AP, CP, CSC) or a PIT file.
Flash official combination firmware to restore partition alignment, then reflash stock ROM. re-partition operation failed. odin
Use the original Samsung USB cable if possible. Avoid using USB hubs; plug the cable directly into a USB 2.0 port on the back of your PC (motherboard ports) rather than front-panel ports. 4. Check Firmware Compatibility
: A faulty or unstable USB connection can interrupt the process. Try using a different USB port or cable. Yes, it can
: The PIT (Partition Information Table) file tells Odin exactly how to divide your device's internal storage. If you check the "Re-Partition" box without providing a PIT file, Odin will fail.
: A faulty USB cable or port can interrupt the NAND write process. Troubleshooting Steps To resolve this error, follow these steps in order: When “Re-Partition” is in Odin, the tool uses a
Yes, the principles are the same for all Samsung Galaxy devices that use Odin. However, newer devices (S20 and above) have more complex partition structures and stronger security checks. While the logic of using the correct PIT file with the "Re-Partition" option remains valid, you may need to use the latest "Patched" version of Odin to succeed.
Download a tool like and open the CSC_xxx file from your firmware package.
Odin uses a , a hidden map of your device's storage layout. The "Re-Partition operation failed" error is a clear signal that Odin was unable to write or read this crucial partition map. This typically occurs in two main scenarios: