Thyssenkrupp Levant Stair Lift Installation Manual Top Jun 2026

: The track is made of anodized aluminum and uses a rack and pinion drive system. At the top end, a trim cap is typically removed to access internal mechanical and "dead" stops held by screws.

Reinstall and securely bolt the bottom mechanical end-stop block back into place. Step 4: Chair and Armrest Assembly

: Wire the rechargeable batteries and install the necessary fuses (e.g., 40 A). Seat and Final Components Seat Mounting thyssenkrupp levant stair lift installation manual top

The carriage contains the motor, gearbox, and safety brake (governor).

I can provide the exact steps or troubleshooting details for your setup. Share public link : The track is made of anodized aluminum

Includes the chair, armrests, seatbelt, footrest, and user controls.

Verify that the stair treads are solid. The stair lift rail anchors directly into the steps (treads), not the wall. Softwood, hardwood, and concrete steps are suitable; heavily decayed or unstable treads must be replaced prior to installation. Required Tools Checklist Precision digital level (minimum 24 inches) Step 4: Chair and Armrest Assembly : Wire

The Levant operates on a 24V DC battery circuit charged continuously via the rail charging strips. Tools and Equipment Required

Once the rail is aligned perfectly, it is bolted directly to the stair treads.

Verify the rail angle matches the pitch of the stairs using a digital angle finder (typically between 28° and 53°).