Twrp Itel Vision 1 Pro Best

: Ensure your battery is at least 60% to avoid sudden shutdowns. Enable Developer Options Settings > About Phone Build Number seven times. Then, in Settings > System > Developer Options USB Debugging OEM Unlocking Computer & Tools : You will need a PC with Minimal ADB and Fastboot installed. Correct Drivers : Install the SPD Drivers for the Unisoc (Spreadtrum) processor. Step 1: Unlock the Bootloader You cannot install TWRP without an unlocked bootloader. Enter Fastboot Mode : Turn off your phone. Press and hold Volume Down + Power

Before starting, ensure you have met the following requirements:

After flashing TWRP, boot directly into TWRP. Go to the Advanced menu, select File Manager , locate /system/system/recovery-from-boot.p , and delete it before restarting your device. To ensure you get the exact files needed, tell me: What is your exact software build number ? Do you already have a copy of your stock firmware ? twrp itel vision 1 pro

Once finished, you must boot into TWRP to prevent the system from overwriting it with the stock recovery.

: You must have a TWRP .img file specifically compiled for the ( Vision 1 Pro Phase 2: Unlocking the Bootloader Connect your phone to your PC via USB. Open a command prompt/terminal on your PC. Type adb reboot bootloader to enter Fastboot Mode. : Ensure your battery is at least 60%

Select (Note: This deletes everything on the internal storage). Type yes and confirm.

Reboot your device into Fastboot mode by typing: adb reboot bootloader Correct Drivers : Install the SPD Drivers for

You must download and extract the following tools onto your PC before proceeding: