If the inverter trips due to overload, turn off the front power switch, remove excess load, and turn it back on after a few seconds. Low Voltage Charging:
: Offers a wider input voltage range (approx. 90V to 295V), suitable for standard household appliances like fans and lights. Graphical LED Indicators & Audio Alerts vguard prime 1150 user manual pdf
Single Battery (12V DC, supports 80Ah to 230Ah) If the inverter trips due to overload, turn
| Problem | Possible Cause | Solution (Per Manual) | | :--- | :--- | :--- | | | Battery not connected properly | Check battery terminals for loose connections or corrosion. | | Battery not charging | Mains supply issue or Fuse blown | Check the input mains fuse; ensure the wall socket has power. | | Low Backup Time | Battery old or undercharged | Perform a deep discharge/recharge cycle or check water levels (if tubular battery). | | Overload Alarm | Connected load exceeds capacity | Disconnect heavy-load appliances (like heaters, irons, or large ACs). | Graphical LED Indicators & Audio Alerts Single Battery
Connect the to the Positive (+) terminal of the 12V battery.
Plug your home's main backup load line into the output socket located on the rear panel of the inverter. Switch on the wall socket power. 🎛️ Control Panel and LED Visual Indicators